Batman Gauntlets

by Dillon McCrea in Living > Halloween

15486 Views, 66 Favorites, 0 Comments

Batman Gauntlets

photo (47).JPG
These Batman Gauntlets are great for completing your batman Halloween costume and even to just walk around with pure swag!

The Materials You Will Need

photo (9).JPG
Soccer Shin Guards

Spray Paint

Bread Knife 

Scissors

Black Soccer Socks 

Cardboard Box

Hot Glue Gun

Black Heavy Duty Gloves

Pen

Piece of Paper

Cutting the Sock

photo (10).JPG
photo (11).JPG
photo (12).JPG
Take your soccer socks and your scissors and cut off the piece where your foot goes. Now that that's off, take the other piece and cut that in half horizontally. They should go on your arms and go up to about your elbows. If your arms are to long use two socks and cut one arm out per sock.

Spray Painting the Shin Guards

photoCAJWE1EZ.JPG
photo (13).JPG
Next, take the black spray paint and the the shin guards and spray paint them.

Drawing the Blades

photo (14).JPG
Then, take the pen and the paper and draw on three blades that look like the picture above.

Cutting and Tracing

photo (15).JPG
photoCAFX6YAI.JPG
Now, take your scissors again and cut out the drawings. Then take the pen again, place the shapes on the cardboard and trace them on.

Cutting the Cardboard

photo (16).JPG
Now, take the bread knife and cut out the shapes from the cardboard.

Repeat the Steps

photo (17).JPG
Take the paper shapes, put them on the cardboard, trace them again, and cut them out so that you now have six cardboard shapes.

Spray Painting the Shapes

photoCAD7I1PD.JPG
Now, take the spray paint again and spray paint the shapes.

Hot Gluing to Shin Guards

photoCALVJ6MJ.JPG
Now, take the shin guards, the hot glue, and the black cardboard pieces, and hot glue the cardboard pieces to the shin guards.

Six More Cardboard Shapes

photoCALMZXJI.JPG
After that, take the paper shapes again and place them on the cardboard. Trace on six of them.

Cutting Out the Cardboard Shapes

photo (19).JPG
Now, take the bread knife again and cut them out. Take the spray paint and paint them....again.

Gluing on the Shapes

photo (18).JPG
photo (47).JPG
Then, take the hot glue gun and glue the shapes on to the second shin guard. You now have two of them.

You are now done with the Batman Gauntlets