Beautiful Bee Bracelet

Ingredients:
- 6 inches brown leather cord, 2 mm
- 6 inches Swarovski pearl chain
- 18 inches waxed linen cord
- 2 antique brass fold-over ends
- 1.5 inches antique brass Really Round cable chain, 2 links removed and set aside
- 1 antique brass lobster claw clasp,10 mm
- 1 honey bee charm
- 1 Swarovski turquoise rhinestone ball
- 1 antique brass extra thick head pin

Tools:
- Chain nose pliers
- Wire cutters
- Round nose pliers
- Scissors

Click Here for a printable version of this tutorial

Click Here for the kit

Carefully wrap the linen cord around one end of the leather 2-3 times. Fit the leather into the fold-over end and crimp the fold-over end with your chain nose pliers. Wrap the linen as shown tightly around the leather and the pearl chain, wrapping once between each pearl. Continue wrapping until the leather and pearl chain are attached for almost the entire length of the bracelet, leaving at least .5 cm/.25 inch of leather unwrapped. Take care that the pearl chain is lined up along one side of the leather and does not spiral around the leather cord. Trim any extra pearl chain.

Wrap linen cord around end of leather and trim cord closely as shown. Fit leather and cord into fold-over end and crimp with your chain nose pliers.

Feed the head pin through the rhinestone ball. Using your round nose pliers, loop the head pin to create a rhinestone dangle. Using one of the chain links attach the rhinestone dangle to the bee charm to create a charm dangle.

Using your chain nose pliers attach the cable chain length to one of the fold over ends. Using the remaining chain link, attach the lobster claw and charm dangle to the remaining fold-over end.