YG-Scanner:Big Holographic 3D Projector by Respberry Pi

We have created 199USD 3D Scanner/Holographic creater;

https://www.instructables.com/id/199USD-3D-Scanner...

Normally we have the cell phone size Holographic 3D projector. But the Holographic projecter based on cell phone was too small So we decicde to DIY a big one with PVC, cardboard, respberry Pi 4 and 32 inches LCD

List of Materials:

1Respberry Pi 4/or 3

2 PVC sheet(0.5mm thick layer)

3 Cardboard

4 LCD 32 inches or less size

5 3D Scanner(optional)

1. Prepare Cutting pattern with Word, and print it with A3 size Paper.

2. Cut the pattern from paper and Cut a thick cardboard with this pattern.

3. Cut PVC board with cardboard pattern.

1. Fold the cut PVC board

2. Dig hole in the top area of PVC board

1.Connect the boards with screws

2.Make a pyramid and stick the pyrimad to thick cardboard

1.Prepare a Cardboard box

2.Cut box with knife

1. Make the LCD flat position and connect Respberry Pi to LCD

2. Put the box and PVD pyrimad on the LCD

Play the video we made with Respberry Pi 4

and enjoy your Holographic 3D! Holographic your things!