Bike Light With Blinking Lights ,turn Signals and Brake (VIDEO)

This is the new bike light I've made for my night rides. It has blinking leds in red, for normal signal, and in yelow for turning signal and a brake light

First I've made a project in MS Paint.
After I made the eletrical project, I decided to use a 9V batery, all leds are 3V.

There are auto blinking led in red and yelow and normal red led's.

Sorry, project in portuguese. Let me translate

Tudo Aceso = All on
Legenda = legend
Vermelho Pisca = Blinking Red
Amarelo Pisca = Blinking Yelow
Vermelho = Red
Pisca Esq. = Left Turn Signal
Pisca Dir. = Right Turn Signal
Freio = Brake

Acoording to the projet

3 blinking led in red
6 blinking led in yelow
12 red led
3 Clicks
1 9v batery
1 keybord cord( broken keybord ofcourse)
1 plastic box from a broken used eletrical material

I used the soldering Iron to make the holes in plastic box and I don't rocommend doing the same

Place the led's in holes and tested conections.

After that hot glue in everything, I didn't solder anything in box.

Solder click's and wires.

Glue the brake click, in a way it press the click everytime you brake, I glued it in a rubber piece that protects the cable.

Attach the box to the bike with zip-tie and put turn click's in place, I putted in gear shifter's

Blinking Lights

Right Turn Signal

Left Turn Signal

Brakes



The batery is in a bag under the seat.