Bird Feather Rainbow Loom

by furby1316 in Craft > Jewelry

23466 Views, 41 Favorites, 0 Comments

Bird Feather Rainbow Loom

13, 7:04 PM.jpg
Please leave comments to tell me how i did and what i can do better

Materials

13, 7:04 PM.jpg
You will need:
1) rubber bands
2) hook
3) loom
4) clip
5) pencil (optional)

Loom

13, 7:04 PM.jpg
Fix your loom so it is in a straight line.

Frame

13, 7:04 PM.jpg
13, 7:04 PM.jpg
13, 7:04 PM.jpg
13, 7:04 PM.jpg
Take whatever color you are using and out line the loom.

Looming

13, 7:04 PM.jpg
Take a new color. The one you want to be the middle. Only put one down.

The V

13, 7:04 PM.jpg
13, 7:04 PM.jpg
Put a band from the middle peg to the second peg on the left in a different color. Do the same to the right side.

Repeat the V

13, 7:04 PM.jpg
Keep repeating steps four and five until you get to the end

Backwards V

13, 7:04 PM.jpg
13, 7:04 PM.jpg
Make a backwards V. Look at picture for help.(the yellow)

Repeat

13, 7:04 PM.jpg
13, 7:04 PM.jpg
Repeat step seven until you get to the end

Cap

13, 7:04 PM.jpg
13, 7:04 PM.jpg
13, 7:04 PM.jpg
Make an eight with your outlining color. Put on side on top of the other. When you are done it will look like two circles on top of each other. Place that at the end of the loom you didn't started on.

Banding

13, 7:04 PM.jpg
13, 7:04 PM.jpg
Go underneath the cap band and grab the yellow (whatever color you used) and bring it to the side it came. Do the same to the other side.

Bring

13, 7:04 PM.jpg
Bring up the pink (whatever color you used) and bring it up

Again

13, 7:04 PM.jpg
Repeat steps 10 and 11 until the end

Frame Looping

13, 7:04 PM.jpg
13, 7:04 PM.jpg
13, 7:04 PM.jpg
Now go back to the end you put the cap on. Take the bottom blue (whatever color you choose) and bring it to the side it came from. Do again to the other side.

Frame Looping

13, 7:04 PM.jpg
Go to the first side you hooked. Take the bottom frame rubber band and loop it to the peg in front

Repeat Frame Looping

13, 7:04 PM.jpg
13, 7:04 PM.jpg
Repeat the looping until the end of the loom

B)

13, 7:04 PM.jpg
Do the same to the other side

Almost

13, 7:04 PM.jpg
13, 7:04 PM.jpg
13, 7:04 PM.jpg
13, 7:04 PM.jpg
13, 7:04 PM.jpg
You are almost done. All you have to do is bring the bands from the two side on both ends of the loom

Clip

13, 7:04 PM.jpg
13, 7:04 PM.jpg
13, 7:04 PM.jpg
13, 7:04 PM.jpg
13, 7:04 PM.jpg
Put a rubber band through all of them on the end. Put another rubber band through that and add your clip go the other side and make a chain off the end (chain in previous instructabe) and pull off