Black and Decker Cooler Leaking-TEAR DOWN TO THE NOZZELS

by mantis22 in Workshop > Repair

2187 Views, 0 Favorites, 0 Comments

Black and Decker Cooler Leaking-TEAR DOWN TO THE NOZZELS

15, 2:24 PM.jpg
15, 1:12 AM.jpg
15, 1:12 AM.jpg
Some tools Phillips screw driver

A pry tool

Remove Screws on the Back

15, 2:24 PM.jpg
Working from one side at a time go down removing all the screws holding the side panels and top out

Removing Push Buttons

15, 1:12 AM.jpg
15, 1:12 AM.jpg
15, 1:12 AM.jpg
15, 1:12 AM.jpg
15, 1:12 AM.jpg
15, 1:12 AM.jpg
8 screws hold the push buttons on

Remove the Front Cover

Using the pry tool and phillips

From the back remove the screws holing the font panel 4 of them

Then u have to use pry tool and Phillips screw driver to pop the front off

Sorry no pics

Nozzle Check

15, 1:12 AM.jpg
15, 1:12 AM.jpg
U can now unscrew the nozzle on top so u can look inside for any blockage

MINE HAD TWO LITTLE ROCKS

SEE PICTURE

Rubber Gasket

15, 1:20 AM.jpg
15, 1:20 AM.jpg
Don't forget this rubber gasket if falls off