Laserized Music

Yes the I made up the word "Laserized" but once you see this Instructable you'll be glad to adopt it. I am aware that there is similar Instructables out there but I thought that this is a far less complex version because it is a simple and nearly costless way to make a spectacular effect with your speakers and a laser(s).
Click here to get your own Green Laser Pointer
Click here to view Laser Pointer Forum

Laserholic Pets
Personal Laser Light Show

Any Laser(s) you want
1 Speaker with a port (Hole in the back)
1 Small cup (I used a coffee sample cup- Starbucks has them)
1 Sharp blade (I used an Xacto knife)
1 Rubber Band
1 Scissor
1 Tape
1 Latex glove
1 CD

Cut the CD to a small square that will fit within the bottom of the cup.

Cut the bottom out of the cup.
Place the palm of the Latex glove over the opening you just cut out and secure with the Rubber band.
Pull the Latex glove so that there are no wrinkles and the surface is smooth
Tape the piece of CD to the Latex glove in the center.

Tape the cup you just prepared over the hole(port) on the back of the speaker.

Nothing else left to do other than put on your favorite music and "Lasertize" your friends! Note: I am using 2 lasers in the video, my 55mw extreme and 5mw core.
Posted by Laser Community member: FathomBoy91