Tiny Terrors Block Trigger Sniper Rifle/shotgun
by tinyhooman in Living > LEGO & K'NEX
338 Views, 0 Favorites, 0 Comments
Tiny Terrors Block Trigger Sniper Rifle/shotgun




Pic 1: stock
Pic 2: gun
Pic 3: scope
Pic 4: fully assembled
I'm sorry that this is a block trigger, But for me it's almost impossible to make a true trigger, So no true trigger guns anytime soon.
Can be shotgun if you put in 3 green rods.
Pic 2: gun
Pic 3: scope
Pic 4: fully assembled
I'm sorry that this is a block trigger, But for me it's almost impossible to make a true trigger, So no true trigger guns anytime soon.
Can be shotgun if you put in 3 green rods.
Bullet

Super easy.
Stock(purely for Quicker Reload and Better Look)

Build from da picture if you can
Scope(optional)

Easy. You don't need broken pieces I just broke my white connectors.
Barrel

The main barrel. not too complicated
Handle

Build 3 of these
Barrel + Handle

Putting barrel and handle together.
Handle goes on the part of red rod that's left on the barrel
Handle goes on the part of red rod that's left on the barrel
Handle + Stock Attacher Thingy

Handle plus the stock attachment point(2 blue rods on lower handle)
Barrel + Scope

Use the blue rod on bottom of scope to attach to the orange connector(not the block trigger)
Handle + Stock

Attaching stock to stock attachment point
I personally put it on the back facing down instead of up, makes it easier to sight, and it's more comfortable.
I personally put it on the back facing down instead of up, makes it easier to sight, and it's more comfortable.
Ram Rod

So ez M8
Inserting Ram Rod and Elastics


Inserting ram rod and adding rubber bands, The amount of rubber bands = amount of power
Pic 1: insert ram into barrel
Pic 2: put elastic on front and over scope
Pic 1: insert ram into barrel
Pic 2: put elastic on front and over scope
Firing
Pull the ramrod back and put bullet in barrel then move block trigger out of way of ram to fire!