Bluetooth Speaker With Ironman Design

The concept of this work is an iron man style bluetooth speaker that seems to work as an arc reactor.

1. 5V LEDs (20pcs)

2. Lithium battery & Battery holder

- I used 3500mAh of 18650 standard.

3. PAM8406 Bluetooth speaker module

4. 3Inch 4ohm 10W speaker (2pcs)

5. Copper wire

- 0.6mm thickness solid wire , Length : min 11meter.

6. Charging & Booster module

- 3.7V 9V 5V 2A Adjustable Step Up 18650 Lithium Battery Charging Discharge Integrated Module

7. Micro push switch

8. 1.8V RED Color LED

- If you don't need the charge indicator, you don't need to buy it.

9. Variable resistor

- 500ohm or 1K

10. AWG#22 Cable 3meter

Please refer to the link below for parts purchase and printing.

https://www.thingiverse.com/thing:4548384

Layer Height : 0.2mm

In Fill : 20%

Top/Bottom Layers : 3

Wall Line Count : 3

Filament Material : PLA

Supports : Middle Body, Coil Pad (Overhang Angle : 50)

Light ring parts must be printed in white or transparent filaments.

1. Remove support from middle body and coil pad.

2. Roughly rub the surface by #220 of sandpaper.Because it will be filled the scratches in putty later,So you can roughly.

3. Mix red-putty with acetone or paint thinner for Dilution

4. Apply diluted putty to the product surface using a brush. Apply it twice so that there are no print marks left.

5. Rub with #400 of sandpaper first, after then rub with #800~#1000 of sandpaper to smooth more.

6. Painting.

Part List

-Support Reactor x 2

-LED Pad x 2

-Light Ring x 2

-Coil Pad x 20

-Outer Ring x 2

-Deco Ring Gold (Three types) x 2

-Deco Ring Silver x 2

-Copper Coil (11meter)

-Screw(3*8mm) x 6

-Cable

*Assembly instructions are detailed in the video.

Part List

- Front Body x 1

- Dial x 1

- Select Song Button x 2

- Support Button x 1

- 4ohm 10W Speaker x 2

- Bluetooth Speaker Module x 1

- Connector & Cable 3pcs

*Assembly instructions are detailed in the video.

Part List

- Middle Body x 1

- Dial x 1

- Handle x 1

- On/Off Button x 1

- Micro Push Switch x 1

- Variable Resistor x 1

- AWG#22 Cable 40cm

*Assembly instructions are detailed in the video.

Part List

- Rear Body x 1

- Charging indicator x 1

- Charging & Booster Module x 1

- 18650 Battery x 1

- Battery Holder x 1

- 1.8V Red Color LED (Option) x 1

*Assembly instructions are detailed in the video.

Arc reactor ass'y + Front body ass'y + Middle body ass'y + Rear body ass'y

The sub assemblies that have been assembled so far have been combined together to complete.