Bmx Kicker Ramp

This is a tutorial on how to make a bmx kicker ramp like this one!

You want to design your kicker ramp's L/W/H. This model's L/W/H is 4/2/1.5, but you can make it any way you want to

You should now design how it is going to fit together, and specifically what materials you are going to use.

Gather all of the materials that you need.
•One 11/30 inch sheet of plywood
•One 3/4 inch sheet of plywood
•One 2x4x6
•One 2x4x6

Draw the lines on the wood to know where to cut. Make sure to add the 20 degree angle.

Mark on the wood where you want your 2x4's to be placed. Also the 20 degree curve has been drawn. You can use whatever curve you want to.

Cut the marked lines that you drew out.

Cut the top to the width and length of your ramp.

Assemble all parts like so.