Board Art
Materials
12x20 Plywood 1/8" Thick
Boards
Laser Cutter (Optional)
Like many Makers, I've amassed several boards over the years, most of them collecting dust in my shop. So decided to make an art piece out of them.
If you've got access to a laser cutter, you can customize the attached template "board art.svg" for your boards. The template is setup for a 12x20" sized piece of material. I used a Glowforge laser cutter on 1/8" thick plywood. I also used the 3m dual lock tape to secure the boards to the plywood in the event I need to use one of the boards.
