Breath Analyzer With OLED Lcd and MQ3 Gas Sensor

Hi, guy today we are going to make a breath analyzer which detects alcohol vapour. so, first

you need to show how does the sensor work so, the sensor work with a chemical reaction with what

it will tell you the readings. so, lets begin :):):):):):):):)

1.Arduino

2.OLED or Lcd

3.Wires

4.MQ3 gas sensor

You can use MQ6 too.

1.The OLED VCC wire will go to 3.3v of the arduino. GND will go to GND. SCL to A5. SDA to A4.

2.the gas sensor VCC to 5v. gnd to gnd. AD to A0.

Download it from here:

When u upload the code if it say warning up so then wait 15 mins if it give the reading it

is working well. if check the code or your connections

Hoooraaaaau!!!!!!!!!!!!!!!!! done