Broken Heart
1. Make a Heart!
a. Start a sketch on any plane
b. Click the line tool
c. Make two diangle lines with the same angle starting from the middle dot (you'll know what I mean). They can be different lengths, but I would not recommend it. I used a length of 100 and an angle of 60 degrees.
d. Draw a tangent line until it hits the line above the middle dot where you started the lines.
e. Repeat the tangent line on the other side.
f. Now that your heart is 2 faces, you can extrude it!
2. Break your heart!
a. Start the sketch on the same plane as your heart.
b. Use lines to create a lightning-bolt face.
c. Use the extrude tool to cut through your heart.
d. Add any text on your heart and extrude/cut it!
Now you're done! Message me with any questions you may have!
Supplies
1. A working computer
2. Fusion 360 Software (Located on Autodesk website)