Broken Phone Fix (silly Solutions)

To create the project, you must use tinker cad.

Here is the link to the screen image used: https://wallperio.com/data/out/454/screen-wallpape...

Video link:

Start by creating a cube that is (39.38 X 19.35)

Create a cube that is (28.28 X 28.28)

Put the cube to an edge and angle it 45 degrees

Set the cube to a hole

Select both blocks and group them to create the round edge of the phone

Duplicate and rotate the block

Duplicate the two blocks and rotate them to create the base of the phone

Group them and set the color to black

Duplicate the phone and size it down

Set it to hole and group the two

This is to create the bezel

Get the image generator

Set the color to blue/cyan/turquoise

Use the broken screen image as the base

Set the smoothness to your liking

Create the notch by duplicating the original base layers (2 of them)

Shorten them and set the color to black

Place a notch on the screen in the optimal location

Set the notch to hole

This is to prevent the textures of the screen from clipping thorugh

Group both items

Place the screen down

Duplicate the notch and return it to the same place (where the hole is)

Create a cube that is (71.91 X 29.92)

This is the base of the tape

Create a triangle that is (4.92 X 6.02 )

We will have 8 in total (4 on each side)

Move the tape over the phone

And voila, it's done