Build a K'nex Bird Cage!

by Knex2thelimit in Living > LEGO & K'NEX

2340 Views, 0 Favorites, 0 Comments

Build a K'nex Bird Cage!

IMG_6557.JPG
IMG_6558.JPG
IMG_6560.JPG

Congratulations! You're now the proud owner of a new pet bird!

You're so excited to go to the other pet store and buy your new friend's deluxe bird cage!

But, there's none left! You can't leave your pet out over-night! What are you going to do...

Never fear! With the new k'nex bird cage, all you'll need is some k'nex and time. Your bird will be so happy in it!

The bird cage features...

- A locking door with five door locks!

- A nice, secure floor for your bird to walk on.

- A handle for easy transportation.

- And a swinging perch for your bird!

So what are you waiting for? Go and proceed to the next step!

P.S. Due to limited time on this Instrucable, I am unable to include a parts list. Sorry! I also used the alternate color scheme for this project.

The Base and Cage Walls

IMG_6563.JPG
IMG_6564.JPG
IMG_6565.JPG
IMG_6567.JPG
IMG_6568.JPG
IMG_6569.JPG
IMG_6570.JPG
IMG_6571.JPG
IMG_6574.JPG
IMG_6576.JPG
IMG_6577.JPG
IMG_6578.JPG
IMG_6580.JPG
IMG_6581.JPG
IMG_6583.JPG
IMG_6584.JPG
IMG_6585.JPG
IMG_6586.JPG
IMG_6587.JPG

This quite an important step. Without it, how would your bird stay in its cage? Make sure to follow all the image notes, as they will help you.

The Door

IMG_6588.JPG
IMG_6590.JPG
IMG_6591.JPG
IMG_6593.JPG
IMG_6594.JPG
IMG_6595.JPG
IMG_6596.JPG
IMG_6597.JPG
IMG_6598.JPG

This is the easiest step. I'm sure you could substitute the hinges for gray connectors. You'll just have to mod the door a bit. To open the door, unclip all locks and swing the door open. There will be two more locks in a later step.

The Perch

IMG_6600.JPG
IMG_6601.JPG
IMG_6602.JPG
IMG_6603.JPG
IMG_6604.JPG
IMG_6605.JPG
IMG_6606.JPG
IMG_6607.JPG
IMG_6608.JPG
IMG_6609.JPG
IMG_6610.JPG
IMG_6611.JPG
IMG_6612.JPG
IMG_6613.JPG
IMG_6614.JPG
IMG_6615.JPG
IMG_6616.JPG
IMG_6617.JPG

Now, you'll build the perch. Don't attach this yet! Set it aside for later.

The Top

IMG_6619.JPG
IMG_6620.JPG
IMG_6621.JPG
IMG_6622.JPG
IMG_6623.JPG
IMG_6624.JPG
IMG_6625.JPG
IMG_6626.JPG
IMG_6628.JPG
IMG_6629.JPG
IMG_6630.JPG
IMG_6631.JPG
IMG_6632.JPG
IMG_6633.JPG
IMG_6634.JPG
IMG_6635.JPG
IMG_6636.JPG
IMG_6637.JPG

This is the most complicated step in the whole Instrucable. Follow every image note! They will really help you! Keep in mind that everything must be attached exactly how I have it. If not, then the top won't connect properly.

Putting It All Together

IMG_6638.JPG
IMG_6639.JPG
IMG_6640.JPG
IMG_6641.JPG
IMG_6643.JPG
IMG_6644.JPG
IMG_6645.JPG
IMG_6646.JPG
IMG_6647.JPG
IMG_6648.JPG

Now, you'll put everything that you've built so far together! Remember to follow the image notes!

The Handle

IMG_6649.JPG
IMG_6650.JPG
IMG_6651.JPG
IMG_6652.JPG
IMG_6653.JPG
IMG_6654.JPG
IMG_6655.JPG
IMG_6656.JPG
IMG_6657.JPG
IMG_6658.JPG
IMG_6660.JPG
IMG_6661.JPG

Finally, you'll build the handle. The circular connection with the green flexi-rod is hard. Just keep trying! Also, this handle does fall off from time to time, especially if you quickly pick up or put the cage down.

You're Done!

IMG_6662.JPG

Hooray! You're all done! Now, put that bird in and watch! Please note that you can move the gray rods around to change the spacing in between them. As far as I know, this is the first k'nex bird cage on Instrucables. Please let me know if it's not! Remember to comment and ask if something is unclear. Thanks for building or reading!