Build a Fully Functional 1x2x2 Rubik's Cube Out of Cardboard

In this Instructable I will teach you how to build a fully functional 1x2x2 Rubik's cube. It's mechanism is based of of a Rubik's brand 2x2x2 cube.  A standard Rubik's cube is a 3x3x3 cube and is 57mm along every edge. This puzzle is 1x2x2 and it is 8 in. x 8 in. x 4 in. This puzzle has only 6 possible different combinations so it is extremely easy to solve.

Note: most of the time I will not say much in the description of the step and will point out most of everything in the pictures.

Note: If you see anything in the picture that doesn't match up with what I say, it is because I made something, took a picture of it, and then later realized that it was wrong, and couldn't go back and take another picture. Do what I tell you to do and not what the pictures show, unless what I tell you to do isn't very specific.

If you make your own, post a picture of it in the comments, and tell me how good it works.

Watch me demonstrate it here: http://www.youtube.com/watch?v=BdfVMhYuVYY

The materials you are going to need for this project:
1. some form of cardboard
2. 6 different colors of paper or posterboard (white, yellow, green, blue, orange, red.) (for making the "stickers")
3. glue: liquid glue and glue stick
4. a chopstick
5. packing tape

Tools that you are going to need:
1. scissors and or x-acto knife
2. paper cuter
3. compass
4. a protractor (to make sure your cardboard is square)
5. a ruler (not shown)
6. a pen/pencil (not shown)
7. a dremel tool with a small bit

Steps 2-4 will be about cutting the material to make all of the materials the right size. Steps 5-10 will be about assembling it all. This step is all about cutting the cardboard.

This step is for cutting the paper for the "stickers". Cut 4 yellow squares, 4 white, 2 orange, 2 red, 2 green, and 2 blue. Cut each square so that they are 3.5 in. at each edge.

This step explains the cutting and gluing of the chopstick. This will be the core when you're done.

Now it's time to glue on the stickers. Pretty simple.

Now that your done making the individual parts, it's time to tape and glue the whole thing together. We'll start with the inner edge pieces (these will be hidden from view in the finished product). 

Now it's time to assemble each of the cubies (each of the indifidual cubes) we'll start with the first one. This will be the fixed cubie.

Let's continue the building of the cubies. now let's do the next one.

Now let's continue with the 3rd cubie.

now it is time build the last cubie.

This is how to take it apart. To assemble it just look at the pictures in reverse order.