Build the Starship Enterprise From Useless Office Supplies

For the Star Trek fan in every office, you too can build this NCC-1701 Enterprise from junk in your desk drawer. Easy to assemble. Impress your friends. Makes a great gift or holiday ornament.

Parts

You will need:

3 medium size binder clips
1 large binder clip
1 sharpie pen
2 ink pens with colored end caps (or pencils). They need not be working.
3 CD's (one preferably silver and unscratched).
Glue stick
Hot melt glue gun or other adhesive (in a pinch, tape will also work).

Assemble Saucer Section

Glue the 3 CD's together with a glue stick.

Modify a Binder Clip

Remove the handles from the large binder clip and install them on one of the medium sized binder clips. You will no longer need the large binder clip.

Assemble the Hull

The hull is the sharpie pen and 3 clips.

Arrange clips in the fashion shown in the picture. Remove handles from the non modified binder clips after you install them.

Engine Assembly

Remove guts of the pens and install the end caps from red pens. (optional).
The red caps will face forward.
Pencils and other writing instruments will work as well.

Attach Engines to Hull

Glue (or tape) pens to binder clip handles as shown in picture.

Add Saucer Section to Hull

Glue CD's to the the front binder clip as shown in the picture.

Results

All finished. Use a lunch bowl as a decorative stand.

Bonus Section: the Starship Reliant

With a few extra parts, you can make the Starship Reliant as well.

Conclusion

Aside from the binder clips (and glue), all the other parts came from the recycle bin.
The total cost was less than $5.

For a future project, it may also be possible to make a Romulan Bird of Prey using similar construction methods:
http://www.cloudster.com/sets&vehicles/STromulanBirdOfPrey/RomulanBirdOfPreyTop.htm
http://www.fantastic-plastic.com/ROMULAN%20BOP%20PAGE.htm