Building Papercraft Koenigsegg One:1 ( Using Origami Tools )

Did you know that Koenigsegg one:1 was the World's first Mega car ! the name one:1 comes from the power to weight ratio also many of you must be familiar with NFS ( Need For Speed ) the ones who don't know about this its a game and it has a movie based on the game.

So I decided to make one and a big thanks to Visual Spicer for providing the free templates of the car.

• Cardstock paper
• White glue or tacky glue
• Cutter & scissors
• Pencil & rulers
• Some sharp object for giving creases
• Printer

• Before starting of you must make sure the size of the cardstock paper which you will be using and I have shared all the sizes of paper so you can just look at them, I have used Legal size for printing.
• Once you have all the parts cut them down with the cutter or scissors, now this is the most difficult part I can say because it requires a lot of patience and time so make sure you take your time.
• This part took me 3 days for completion but if you do fast enough probably it will take one day.
• Remember to write the page number on the back side of the parts so that you can easily join them.

• Take a needle and make cresses on the front cover of the car similarly do for the rest.
• Once done join the parts by using white glue.
• Tip- use a toothpick for clearness so that the glue doesn't make mess.
• Join the parts carefully by using the instruction file which I have shared.
• Make sure the cresses are coming on doted lines only.

• For the windshield take the parts as suggested and make join them with the glue.
• Make creases on the windshield so that it can fold on both sides.
• Now below the windshield add the joining part as shown above.
• Now join the side parts of the car such as the windows and the doors as given in the instruction file.

• For this section of the car make the desired part give the creases and join them with the white glue.
• For this part which is shown above make sure that the cresses are aligned properly.
• Do the same with the rest of the upper section of the car as per the instruction given in the file.

• Align the back parts of the car as per instruction given I the file.
• Make the creases a little sharp for the back portion because as you will progress you will see their are certain parts which require more creasing for their look.

• This part is easy as you have to repeat the same procedure again and again but also this part takes more time and patience for making up the perfect tires.
• Also this step requires more creases for perfection.

• After adding little details to car such as side mirrors and etc our Papercraft car is ready !!!

Also I have shared all the pdf for the design and instruction files if you have any doubts please feel free to comment and ask your questions also if you want to purchase different awesome papercrafts you can visit here www.visualspicer.com..