Building a 3D Printer Under 299$

by AlmusYang in Workshop > 3D Printing

152011 Views, 1527 Favorites, 0 Comments

Building a 3D Printer Under 299$

step19.jpg
121.jpg
Mini333-封面.jpg

Hello again, remember me?

I have published an instructable about how to make a 3d printer under 200$ - Tower Simple XL.

It's a low cost, full-featured 3D Printer, and the most important thing is, you don't need any 3Dprinted parts to build the 3D Printer. If I have a 3D printer,I don't have to look around how to build a 3D Printer...

If you are interested in creating a 3D Printer, you should have seen it. https://www.instructables.com/id/Building-a-3D-Prin...

And today I brought another more excellent project. Introduce my new machine - Vaster Mini3.

Salute to i3.

## Update v1.2.1 on step 23 ##

2015-09-22

Fan duct .stl file for Mini3 published on thingiverse: http://www.thingiverse.com/thing:1026997

Screws and bolts list added.

Fine-tune.

####

Mini3 Version 1.0

step1-1.jpg
step1-2.jpg
step1-3.jpg

This is the original version of Mini3 , I define it as the Version 1.0

I've done a lot of work to upgrade it, the latest Version of Mini3 is 1.2.1 , at 2015-09-22. and I'll show it in the following instructable.

In fact, all the versions are very similar.

What is highlighted in picture 2?

Check this out and find something interesting, http://www.thingiverse.com/thing:5762

Don't waste any materials.

Downloads

Lasercut

2015-08-23 120649.jpg
5mm-1.PNG
5mm-2.PNG

Wood thickness 5 mm to 5.2 mm.

Assemble the Main Body

2015-08-23 121122.jpg
step3.jpg

Pay attention to the position of the board.

Version1.1 is the same principle.

X Axis

2015-08-25 141100.jpg
step4-1.jpg
step4-2.jpg

Assemble the X axis.

## X-axis part list ##
Synchronizing wheel ; 2GT-20T ; 1

Synchronizing belt ; 2GT belt ; 600mm

Optic axis X- 225mm- Diameter 8mm ; 2

SK08 ; 4

SC8VUU ; 4

SC8UU ; 3

F625 ; 2

Leadscrew nut- T8 ; 2

NEMA17 ; 1

End Stop ; 1

####

Just push-fits SK08/ SCS8VUU/ SCS8UU/ F625/ NEMA17 together.

Y Axis

step5.jpg

Assemble the Y axis.

## Y-axis part list ##

Synchronizing wheel ; 2GT-20T ; 1

Synchronizing belt ; 2GT belt ; 500mm

Optic axis Y- 245mm- Diameter 8mm ; 2

SK08 ; 4

SC8UU ; 4

F625 ; 2

5mm-8mm Coupling ; 2

NEMA17 ; 3

End Stop ; 1

####

Just push-fits SK08/ SCS8UU/ F625/ NEMA17 and Coupling together.

Assemble!

2015-08-25 162304.jpg
1副本.jpg
2015-08-25 162217.jpg
2015-08-25 162908.jpg
2015-08-25 163007.jpg

Attach X axis to main body with.

## Z-axis part list ##

Optic axis Z- 318mm- Diameter 8mm ; 2

Leadscrew - T8 -300mm ; 2

End Stop ; 1

####

No zip tie, get stronger.

And now we have successfully assembled a Mini3 V1.0

Mini3 was inspired by my desktop CNC.

I used to think of transforming the CNC to 3D Printer, But its printing speed is too slow. I think if we want to use the CNC to 3D Print, it must use ball bearings instead of leadscrew.

Mini3 V1.0

step7-4.jpg
2015-08-25 163457.jpg
2015-08-25 163443.jpg

Mini3 V1.0

step7-3.jpg
2015-08-25 163702.jpg

Mini3 V1.1 , a New Beginning

step9.jpg

After assembled Mini3 V1.0, I found its potential for upgrading and created an upgraded version.

In fact, V1.1 and V1.0 are exactly the same. Except a full version of the shell and some of the details of the adjustment.

Mini3 Version 1.1

step10.jpg
step10-2.jpg

The latest Version of Mini3 is 1.2.1

2015-09-22

Lasercut

2015-08-28 115052.jpg
5mm-1.PNG
5mm-2.PNG

Lasercut as usual.

Wood thickness 5 mm to 5.2 mm.

Downloads

Assemble the Main Body

step12.jpg
2015-08-28 124849.jpg

Pay attention to the position of the board.

Mini3 V1.1

step13.jpg
2015-08-29 085723.jpg
2015-08-29 085904.jpg

Electronic Parts

424px-Rampswire13.svg.png
800px-Arduinomegapololushieldschematic.png
ramps14.jpg
2015-04-30 161122-2.jpg
2015-04-30 161339-2.jpg

In this 3D Printer project, i continuing to use RAMP1.4, So it's the same with Tower Simple XL.

1. LCD 2004 *1

2. Arduino Mega 2560 *1

3. Ramps 1.4 *1

4. A4988 StepStick Stepper Motor Driver *4

5. 12V 40W Heating pipe *1

6. NTC Thermistor 100k

Mini3 V1.2 , Instructables Edition

step17.jpg

Mini3 V1.2 , instructables edition

## Update ##

Add 2004 LCD smart controler.

Add Mini3 extruder mount.

Fine tuning.

####

Mini3 Version 1.2

11111.PNG

The latest Version of Mini3 is 1.2.1

2015-09-22.

Downloads

Lasercut

2015-08-31 144210.jpg
5mm-1.PNG
5mm-2.PNG

Lasercut as V1.0 and V1.1.

Wood thickness 5 mm to 5.2 mm.

Assemble

2015-08-31 144210 - 副本.jpg
step18.jpg

Assemble the main body

Remove parts from V1.1 to Version 1.2

Mini3 V1.2

step20.jpg
step22.jpg
step21.jpg

Mini3 V1.2 Extruder Mount

step23.jpg
step24.jpg
step25.jpg
2015-09-01 125928.jpg
2015-09-01 125938.jpg

I designed new lasercut parts to replace the old one.

Not only more firmly, but also cheaper and easy to get.

Finished!

2015-09-02 093030.jpg

Finished and run some tests.

Vaster Mini3

step19.jpg

//////////

Mini3 Version 1.2.1

121.jpg

Mini3 V1.2.1 , Ultimate upgrade for 1.2 series.

## Update ##

Add Mini3 fan duct.

New control board.

Fine-tune.

####

List of Screws and Bolts

111.jpg

## part list ##

All the number of screws and nuts.

M3*10 screws / stainless steel / 35

M3*12 screws / stainless steel / 3

M3*16 screws / stainless steel / 48

M3*27 screws / stainless steel / 2

M3*30 screws / stainless steel / 6

M3*35 screws / stainless steel / 2

M3*40 screws / stainless steel / 9

M3*6 screws / stainless steel / 15

M3*8 hexagon copper post / brass / 14

M3 spring washer / iron / 35

M3 gasket;washer / iron / 63

M3 nuts / iron / 61

M3 thumb nut / iron / 4

M4*10 screws / stainless steel / 1

M4*12 screws / stainless steel / 14

M4*20 screws / stainless steel / 9

M4 spring washer / iron / 14

M4 gasket;washer / iron / 14

M4 nuts / stainless steel / 2

M5*30 screws / stainless steel / 2

M5 spring washer / stainless steel / 4

M5 gasket;washer / stainless steel / 4

M5 nuts / stainless steel / 2

M6*12 screws / stainless steel / 16

M6 gasket;washer / stainless steel / 2

M6 nuts / stainless steel / 2

Mini3 Part Display 1

零件2.jpg
零件5.jpg
零件6.jpg

1.SC8UU

2.SK08

3.SC8VUU

Mini3 Part Display 2

零件1.jpg
零件3.jpg
零件4.jpg

1.NEMA17 ; MK8 Extruder and i use 1.75 filament.

2.T8 lead screw ; 300mm*2.

3.Axis diameter 8mm ; 318mm*2 / 245mm*2 / 225mm*2.

Mini3 Part Display 3

零件7.jpg
零件8.jpg
零件9.jpg

1.2004 LCD smart controller ; 4G SD card

2.Ramps endstop

3.All-in-one MKS board

i use all-in-one MKS board instead of original Ramps control board, in fact they are the same. MKS board is based on Ramps and it just make wiring more convenient.

Mini3 V1.2.1

1.jpg
2.jpg
3.jpg

Mini3 V1.2.1

4.jpg
5.jpg
6.jpg

Mini3 V1.2.1

7.jpg
8.jpg
9.jpg

Cube Test

11.jpg
12.jpg
10.jpg
16.jpg

slice by cura 0.2 layer height and 10% infill ; print with raft.

Cube Test

13.jpg
14.jpg
15.jpg

slice by cura 0.2 layer height and 10% infill ; print with raft.

THANK YOU FOR YOUR SUPPORT

2015-09-19 234610.jpg

This is about how to build a high-performance 3D Printer under 299$.

Thanks for taking the time to check out my instructable on how to build a 3Dprinter, if you like this instructable, please vote for me on EPILOG CONTEST VII, If i won the laser system prize, i will offer free laser cut service of Mini3 lasercut files for any one who want to build Mini3 and vote for me on EPILOG CONTEST VII, please vote and come back leave a comment. (just free laser cut service, not free material and free worldwide shipping)

Feel free to comment and share this project with your friends who might like this instructable. Thank you for your support.