Butter Stamp

Hello, for this instructable I am going to teach you how to make a butter stamp. Before we start, set the snap grid to 1.0 mm.

Computer

3d printer

From the shape selection, grab a box and bring it to the plane. We will call this shape S1.

Change the width of S1 to 35 mm.

Change the length of S1 to 35 mm.

Change the height of S1 to 10 mm.

Add another box, we will call this box S2.

Change the length of S2 to 30 mm.

Change the width of S2 to 30 mm.

Change the height of S2 to 6 mm.

Raise S1 to 6mm

Select S1 and S2

Press the align button

Press the middle button on the X axis

Press the middle button on the Y axis.

Group the shapes. This combined shape will be referred to as S1.1.2

Add a box, this shape will be called S3

Make a copy of S1.1.2 which will be called S1.2.2

Move S1.1.2 and S1.2.2 out of the way

Change the width of S3 to 42 mm.

Change the length of S3 to 42 mm.

Change the height of S3 to 24 mm.

Change S1.2.2 into a hole

Raise S1.2.2 to 12 mm.

Select S3 and S1.2.2

Press the align button.

Press the middle button on the x axis

Press the middle button on the Y axis

Group the selected shapes, this will now be called S1.2.3.

Bring a tube to the plane. This will be called S4

Turn S4 90 degrees sideways

Raise S4 to 10 mm

Select S1.1.2 and S4

Press Align

Press the middle button on the X axis.

Press the middle button on the Y axis.

group the selected shapes.

Congrates, Your done