Button

by mcdonaldhk in Workshop > 3D Printing

301 Views, 1 Favorites, 0 Comments

Button

IMG_20220527_092629.jpg

it will be able to sense modern and will light up and make sound based on it

Screen Shot 2022-05-20 at 9.37.34 AM.png

Go to maker case.com and copy the dimensions to what is shown in photo then cut holes for sensors and then cut

Capture.PNG

Grab your ultrasonic sensor and plug in wires as shown and then grab the argrino and plug in wires

IMG_20220523_095431.jpg

Tape the sensors into the holes and then wire them into the argino as shown

IMG_20220523_093630.jpg

once connected use it and test Wirth computer too see if lights up

IMG_20220525_103207.jpg

Put the mini bred bored in and plug iun wires as shown in photo after plugging in and then wire it to all of the other ones in the box