Buzz Lightyear's Box (Spaceship)

I always liked the Toy Story movies. At first, I could not find anything to do on these movies. But, looking a little more, I found the Buzz Lightyear's box that seemed pretty easy to do. It was just about finding the design!

Material :

• Glossy paper
• Printer
• Scotch tape
• Glue stick
• Transparent sheet (like a Plastic Paper Protector)

I speak french so there might be English mistakes. Sorry in advance.

Fortunately, I came across these models of the box of Buzz Lightyear. That helped me a lot. I did not have to do the design from scratch. So, the first step was to print all on multiple pages. I have provided you Word files that I used for printing. The dimension should be good. The height of my box is almost 12 1/2''. When you finish printing, proceed to the cutting.

Files here :

http://1drv.ms/1BgdayT

According to the two designs of the first step, I assembled the box. To attach two papers together I used scotch tape.

As you can see at this moment, there is parts that must be insert into other parts (like a 3D puzzle). I used an Xacto for this.

As you can see, I cut the 3 front parts of the box. Then, I used my Plastic Paper Protector, previously cut to fit, and I glued it to the front (at the back of the front design)

With everything "scotch" together, simply fold all the parts of the box according to the model of the box (you can help you with the pictures I gave you). Simple puzzle.

An easy DIY project for everyone for cheap. It cost me 0$. Hope you enjoyed it, any comment is welcome.

- John, from Canada