CD Clock

by merleman in Circuits > Clocks

24883 Views, 35 Favorites, 0 Comments

CD Clock

007.JPG
Ok this is a fun idea i had to take my favorite cd and turn it into a clock. Its very simple, takes very little time, and everyone seems to want one.

Things You Need

001.JPG
Cheap walmart clock, scissors, washable marker, some cds, and super glue.

Draw Lines

002.JPG
Exactly what the title says, just take the marker and draw lines on the back of the cds so they turn out looking pizzas.

Cut

003.JPG
004.JPG

Now using the sissors, CAREFULLY cut along your lines. I say carefully because I broke several cds in this procceedure. After cutting take a few pieces of each cd and try to fit them into a new cd as seen in the picture.


The Clock

006.JPG
005.JPG
Now that the cd is ready its time to prep the clock. If its a cheap walmart clock or any other cheap clock it just pops apart. If this isnt the case for your clock grab a hammer and go at it! all you need is the gear holder aka thing that makes clock tick.

Glue

007.JPG

Now just super glue piece by piece untill clock is complete. Simple!

Finished

008.JPG
Now that the clock is finished hang and admire. you can paint the hands if desired. Another way  I did this clock was just take one cd and super glue it on as seen in picture.