Cable Holder for Prusa I3

This (wolfCaseCableHolderMulti_V02) is the latest and most effective cable holder we designed for our machine.

Print with flex filament so piece can flex around the vertical Y axis strut of the Prusa i3

look for flex filament brand setting requirements:

General settings:
No retraction

High heat bed

High heat to extruder nozzle

Slow speed.

3 other designs not yet tested, but suitable for different cable arrangements, look to the STL files

Holds stock wires that are quite long in a somewhat tidy place.

reduces need to cut, solder or fix new wire connections if wire is too long.