Camera JIB From Camera Accessories

And don't forget to thumb up, subscribe, comment and share this video on Youtube before 15/12/2013 to win several of the pre-assembled parts so you could build your own! And for more DIY film gear check out my DIY HDSLR playlist here https://www.youtube.com/playlist?list=PLAdjMWVKvc3CifwzsKaTMS2JLNVvc-qhp

In this video I will teach you how to build a camera jib with remote tilt made from various camera accessories and you can find in a camera shop. And only need to drill 4 holes through a plastic pulley and the rest is super easy to put together.

Parts list:
2x 10cm Rope Pulley wheels KBS100K10v - http://www.wielen-bandenhuis.nl/groefwielpom.html
1x Dubble-L Bracket Falcon Eyes TMB-16T - alternatives on Ebay http://goo.gl/Hg7CLX
1x Boom arm grip adapter from Ebay - http://goo.gl/adX55Y
1x Manfrotto 234rc - http://goo.gl/WDm3Vx
1x M8 40mm Bolt
1x M8 90mm Bolt
6x M8 Nuts
4x M5 30mm Bolt
12x M5 Nuts
4x M5 bolt caps
4x Rubber bands
Few meters of washing line cable
Either a sturdy monopod or a boomarm. As if you would get a boom arm you could buy a set which included the boom arm grip plus also weights which lessen the total cost.


Follow me by liking my FB page https://www.facebook.com/bychungdha

See more on my blog http://www.chungdha.com