Camera Slider With Object Tracking

Hello everyone I made this camera slider it has so many amazing features, for example it can slide and rotate the camera in the same time it can stand in 90 degree + 30 degree the electronic so simple don't need arduino or any coding

for this project you need this things :

Hardware parts:

• wiper windshield DC motor
• -12v power supply
• dpdt switch
• two limit switch
• motor speed controller
• -three linear shafts (one of them 56 cm and two of them 60 cm) all of them 12mm diameter
• -5 linear bearings for 12 mm shaft
• -two big ball bearing ( inner diameter is 17 mm and outer diameter is 40 mm)
• -one small ball bearing ( inner diameter is 8mm and outer diameter is 22 mm)
• -six 13mm head size bolt (55 mm length)
• -four 8.5mm head size bolt (52 mm length)
• -one 8.5mm head size bolt (78 mm length)
• -150cm of 6mm belt
• -1kg of PLA filament

I designed all parts by fusion 360 and i attached all cad file you can download them

Note/

print part 11 two times

print part 10 six times

you can use this diagram to wire all electronics

you can see the tutorial for assembling Components