Candy Drop Dispenser!
![IMG_0799[1].JPG](/proxy/?url=https://content.instructables.com/F61/RDGM/GP6ZMBS6/F61RDGMGP6ZMBS6.jpg&filename=IMG_0799[1].JPG)
Welcome! This is a candy drop so if you were to press the button then candy will drop from the SKY! It can also be used for Halloween. You could move a statue or something(be creative) so that when you move it it will press the switch! This project should only take 30 mins. All you will need is: Arduino UNO, servo motor, four screws, two pieces of thin wood, resistor, button (or something like it), tape, big rounded juice container, wires and if you would like, a breadboard. I will be using a breadboard in this project.
Building the Dispenser
follow the instructions on the pictures.
Building the Circuit.
PROGRAMING
This is a simplified version of the basic function that when the button is pressed it drops candy. It works, go ahead and try it.
Downloads
Now Just Hang It Up Somewhere!
Use you imagination for changing the button to something else use a riddle to find the secret statue that they must move that will press the button! Have fun!
Look at some of my other projects at https://www.instructables.com/id/Candy-Drop-dispenser/
https://www.instructables.com/id/Password-protected-Secret-Telling-Arduino/
https://www.instructables.com/id/Arduinik-The-HumanoidBiped-Robot/
https://www.instructables.com/id/RFID-Reader-Identify-anything-with-RFID-from-cred/
Look at some of my other projects at https://www.instructables.com/id/Candy-Drop-dispenser/
https://www.instructables.com/id/Password-protected-Secret-Telling-Arduino/
https://www.instructables.com/id/Arduinik-The-HumanoidBiped-Robot/
https://www.instructables.com/id/RFID-Reader-Identify-anything-with-RFID-from-cred/