Cappy From Super Mario Odyssey

by RhinoWarior in Craft > Paper

1831 Views, 4 Favorites, 0 Comments

Cappy From Super Mario Odyssey

IMG_20190708_1759038_rewind.jpg
IMG_20190708_1747525_rewind.jpg

I hope you have fun with this Super Mario Odyssey inspired project.

Downloads

Supplies

You will need a hat, some cardboard, safety-pin, a glue stick, scissors, and the word document with eyes. You could also find your own eyes from the internet. or draw your own eyes.

.

IMG_20190708_1743569_rewind.jpg
IMG_20190708_1748486_rewind.jpg
  • print out the word document.
  • cut between the two sets of eyes.

There are many ways to attach the eyes to your hat. I will show you two of them.

Methed 1 for Hats With Bands

IMG_20190708_1750261_rewind.jpg
IMG_20190708_1754132_rewind.jpg
IMG_20190708_1755558_rewind.jpg
IMG_20190708_1758053_rewind.jpg
  1. Cut out the eyes from the paper you printed.
  2. Cut out the exact same shape out of the cardboard.
  3. Cut out a little flap at the bottom of the cardboard eye shape.
  4. Glue the cardboard to the eyes leaving the flap with no glue.
  5. Slip the flap over the band of your hat.

Methed 2 for All Hats

IMG_20190708_1802259_rewind.jpg
IMG_20190708_1803210_rewind.jpg
IMG_20190708_1807263_rewind.jpg
IMG_20190708_1813228_rewind.jpg
  1. Glue the eyes to a piece of cardboard.
  2. Cut them out.
  3. Take a safety pin and poke it through the center of the eyes and poke it

    back though the other side.

  4. Do the same for the hat with the same safety pin. Close the safety pin and you are done.