Car Audio With Battery and Pc Power Supply

Try at your own risk ( Am not responsible for any damages to equipment or injury sustained while operating . Thank you .

1. Car Battery (Required) . Non liquid , liquids will release hydrogen . Ventilate area if using .
2. Car amp . (Required)
3. Subwoofer (Required)
4.Pc power supply (Required)
5. Car Stereo (Required)
6 . Car speakers (Required)
7. Battery Maintainer (Required)
8. Stereo Installation Kit (Required)
The rest of the accessories are optional .
9.Tweeters (Optional)
10.Speaker Holders (Optional)
11.Radio Antenna (Optional) Hanger as substitute.
12.Car Headlights (Optional)
13.12 V Car Charger (Optional)
14.12 V Car Lighters (Optional)
15.Toggle Switch (Optional)

This will make or break your sound system layout . Here is a list of everything you will need . (Required) or (optional) .
1. Car Battery (Required) . Non liquid , liquids will release hydrogen . Ventilate area if using .
2. Car amp . (Required)
3. Subwoofer (Required)
4.Pc power supply (Required)
5. Car Stereo (Required)
6 . Car speakers (Required)
7. Battery Maintainer (Required)
8. Stereo Installation Kit (Required)
The rest of the accessories are optional .
9.Tweeters (Optional)
10.Speaker Holders (Optional)
11.Radio Antenna (Optional) Hanger as substitute.
12.Car Headlights (Optional)
13.12 V Car Charger (Optional)
14.12 V Car Lighters (Optional)
15.Toggle Switch (Optional)

Either put a connector to your green wire and ground wire (Any) or strip them and connect them (As done so in photo) This will power your pc power supply on and convert it to Dc Power ( Direct Current . For Dummies ( Car Power ) . If your power supply doesn’t have a switch , simply unplugging and plugging it back in will do . You can add a switch if necessary. If successful your power supply’s fan will start running and you will hear it also .

Your stereo will have a red (ignition) , yellow (12v positive) , and black (12v ground ) wire . Connect a positive 12 v to your positive 12 v, yellow to yellow , a 12v ground to your 12v ground (black to black ) , and a 12 vpositive to your 12 v ignition ( yellow to red ) this should give your stereo power

Plug your positive ( Red Wire ) to your power on amp . Plug your amp ground to a metal (if no power than to your battery . Plug the remote wire from your amp to your ground . (This will allow it to power itself up . Be careful as these are wires and electricity . If you want your amp to come on as your car stereo does skip that step and plug your remote from your amp to the remote on your car stereo , the blue or blue and white wire . As you would in a car . Note that your amp will not come on unless you cut your stereo on first .

Plug your car speakers to to the stereo . Your white / white and black . Gray / Gray and black . Etc. Your solid colors are always ground . In this instance you decide which wire is positive and negative . For these are just the car speakers .

Plug the subwoofer speaker to your amp . Black (Ground) And Red (Positive) to matching on Amp . Plug your input output (RCA Cables ) to your stereo , red to red , black to white . Whatever the case .

Plug maintainer to battery so that it keeps a charge , This will let you play for long periods of time without much battery drainage .

As far as accessories , your Positive 12 v and negative 12v will plug in to accessories . Connect them properly .

Everything should be working properly at this point . Be careful and I am not responsible for any damages to equipment or injury faced while operating . Try at your OWN RISK . Thanks and have a good one .