Cardboard Master Chief Helmet

Need to fight the Covenant in a pinch? Wanna look cool in a Nerf War? Learn how to make a Master Chief helmet in a matter of minutes!

The cardboard used is a small Body Shop shipping box. You can use any box you’d like, but make sure to cut out all the pieces. To make the front part of the helmet requires some precision, so be careful when using any of the knives.

Bend the square cardboard until it looks slightly rounded on the outside.

Repeat the same steps for bending the back part of the helmet.

Tape the top of the helmet(the piece with the cardboard sticking out) to the back. Remember to tape some on the inside as well.

Tape the front of the helmet. You can adjust the size using the smaller pieces if you want.

Tape as if the empty space was a piece of cardboard, but remember to tape the sticky side facing out side. Once you taped the inside, tape the sticky part.

Remember that this section is optional, but if you want it to look good, add the following details:

Light things
Filter details
Actual visor
Paint
Dimension

For demonstration, we will be adding non functioning lights and dimension.