Cardboard Ping Pong Table and Padle

Supplies that you need:

1 Tape

2 Cardboard

3 Card board strip

4 String

5 If you want exacto Knife

cut out a cardboard piece that is 60 inches by 25 inches and then fold the edges that are around the cardboard in about a inch.

use duck tape to put around all the edges. Look at image if your confused.

Put a piece of cardboard in the center of your already big piece of cardboard, and measure it so that it lines up perfectly. Look at image if confused.

Put string around the middle piece of cardboard if you want. Example above.

Trace either a picture of a ping pong paddle or trace an actual paddle if you already have one. Make sure you cut out two pieces of cardboard to make it extra weighted and thick. Look at image above.

Your finished! Try your new creation out and see if it works or not. If you need help review the images.