Cell Phone Wrist Band

by emit in Craft > Fashion

13836 Views, 7 Favorites, 0 Comments

Cell Phone Wrist Band

DSCF3274.JPG

Cell Phone Holder

DSCF3278.JPG
Buy a Dollar store cell phone belt holder, we like the magnetic closer

DSCF3282.JPG
Remove the belt clip and rivet, and then cut slot in each side about the center, with utility knife

Get Velcro Ready

DSCF3280.JPG
We used one sided velcro from dollar store, measured for my wrist, and then measured another piece of soft side sewn to the back of the loop side so that when it is wrapped around the wrist, it has some place to grip onto

Slide Velcro Through Slit

DSCF3283.JPG
We put the loop side up through the slit

Putting On

DSCF3277.JPG
Put it on just like a wrist watch, and wrap the velcro around wrist and trim to length.

Install

DSCF3276.JPG
Install cell phone

Making It Smooth

DSCF3281.JPG
We found the loop side under our arm was rough, so cut another piece of soft side and attach to under side of arm to make it smooth. This allows us to put coats and jackets on without taking the phone off our wrist. And more comfortable than a belt.

With jackets and coats on, it was always a problem getting at the phone when driving, this way you can open the holder and remove and open the phone with one hand. We like it, and it is comfortable to wear.

Finished

DSCF3274.JPG
The end product, try it, you will like it.