CellPump Afridev Install

IBICE BIKURIKIZWA MUKWENSITARA SENSOR KURI AFURIDEVU

When we reach to the site: We have to fill the iform and submit it when the installation is done

Igihe ugeze aho ipompe iri: hari ifomu ugomba kuzuza, warangiza kwensitara ukayohereza.

Choose a sensor to install

Hitamo sensa yo kwensitara.

Remove the paper in the sensor for powering

Kura agapapuro muri sensa kugirango amabuye atangire gukora.

Connect the antenna on that sensor.

Comeka antena kuri ya sensa.

Then contact the dashboard monitor through whatsApp and ask him or her if the sensor you are about to install is reporting? Meanning you should give him or her the sensor ID while waiting for the report .......go ahead with the next step

Baza umukozi wasigaye mu biro ko sensa watoranyije yo kwensitara iri gutanga amakuru?

Umubaze ukoresheje whatsapu. Kugirango ashobore kugusubiza ugomba kumuha umubare wa ya sensor uba imyuma. mu gihe utegerreje igisubizo komeze n'ibikurikiraho

Open the bolts of the pump cover using the spiner.

Fungura amaburo y'umupfundikizo w'ipompe ukoresheje supina.

Then remove the pump cover or the lid:

Pfundura umupfundikizo w'ipompe.

Open the bolts of the handle ( using the spiner), then remove it.

Fungura amaburo ya hando ( ukoreshe supina), noneho nayo uyikureho.

Lift up the rod and position it in the place of the bolts cover.

Zamura rodi, uyitereke mu mwenge uri ahagana inyuma ku mutwe w'ipompe.

Measure where to install the antenna.

Pima aho kwensitala antena.

Drill the antenna hole using the battery powered impact driver.

Tobora aho antena inyura ukoresheje dirila (imashini itobora)

Shave the PVC using a dremel for the sensor to fit in the pump.

Kata pvc ( igice cy'itiyo) ukoresheje imashini yogosha kuburyo ubona umwanya uhagije sensa ikwirwamo.

Put the antenna through the antenna hole and tighten its bolts using spanner 18

Shyira antena muri pompe uyinyujije hamwe watoboye, uyifunge ikomere ukoreshe supina ya 18

Fix the antenna cover using a driller, and 4 screws.

Shyiraho umufuniko wa antena ukoresheje dirila (y'umuhondo n'umukara), ukoreshe n'amaburo ane yo kuyifunga neza.

Clean up where to put the sticker in the pump with a wire brush, then put the sticker in the pump (pump ID), and take a photo of it.

Hanagura neza aho ushyira sitika mu ipompe (ukoreshe uburoso bw'icyuma niba hari umugese, cyangwa ukoreshe ubusanzwe niba hari ibyondo guso) nyuma uhafotore.

Back to the dashboard monitor on whatsApp, if the sensor is reporting.

Ongera ubaze wa mukozi wo mu biro kuri watsapu ,niba ya sensa yatanze amakuru?

Then take a photo of the sensor barcode.

Fotora umubare wa sensa uba inyuma.

Put the paste on the sensor using the seleinge

Shyira pesite y'umweru kuri sensa ukoreshe serenge.

Shave or cut a flege (one side of the sensor)

Kata umukondo umwe wa sensa ukoresheje pense.

Connect the reported sensor to the installed antenna

Comeka ya sensa yatanze amakuru kuri antena wamaze kwensitala

Install the reported sensor

Ensitara ya sensa yatanze amakuru.

Clean where to put the antenna cable using wire bush and tighten it with a twisty tie tape it in the tank.

Tunganya aho ushyira umugozi wa antena, ukoresheje uburoso bw'icyuma, umugozi uwufatishe, akagozi kumukara kabigenewe nyuma uwomekeshe tepu imbere muri pompe.