Chandelier

hi guys. here i`m going to show you to make an easy chandelier .it is cheap and beautiful and so powerful.

the important thing about this chandelier is that you can easily change the direction and amount of lightening by opening and closing the duke. do you remember old dukes? they will give you such opportunity

important materials:

50 * 1 watt LEDs + 50 small lenses

a driver for 50 LED ( should be 50 Watts)

old duke

car rotor start

fir you need to buy a car start ( just a rotor) which is not working and useless! it is less that 1 $ . then you will take it apart like the picture. actually these are LED heat sink and for more beauty.

then mount the LESs on the heat sink. every 2 leds on one heat sink. then you would better to mount small lenses on them for more brightness.

next step is to install them on the duke and wiring them as in-structure of driver. usually you should series them.

here we will install the driver wires.

it work with 220 volt .it has 50 watts and you can enjoy of its lightening. you can close it to give you a focused lightening ,then you can open the duke in order to have a wide lightening.

Bear in mind that , it must be installed on the roof for better view and lighting.

;-)

thank you all and sorry for my bad English.