Change a Watch Battery Without Tools
by WYN soldier in Circuits > Electronics
316127 Views, 34 Favorites, 0 Comments
Change a Watch Battery Without Tools
For this instructable, I inspired myself of all those watches battery changing tutorials videos because they all have a tool in comon : The screwdriver for watches. I thought that it was useless to buy that tool.
All you need is :
-a watch with a back you can unscrew ( like in the picture )
-a pair of scissors
-a wire (a pin)
-not a new battery, you don't know the battery number yet, (they are not all the same)
Open the Bracelet
#1 Open the bracelet
At the end of the attachment of the bracelet, there are some little holes,
you need to push on the telescopic pin that assembles the 2 parts.
Take your wire and insert it.
At the end of the attachment of the bracelet, there are some little holes,
you need to push on the telescopic pin that assembles the 2 parts.
Take your wire and insert it.
Unscrew the Back
2# Unscrew the back
Put your scissors ilke in the picture below. Push hard on it and turn counter clock wise.
Put your scissors ilke in the picture below. Push hard on it and turn counter clock wise.
Take Off the Battery
3# Take off the battery
Take your wire and slide it gently under the battery. Pop it out.
Take a look at the battery and take in note the serial number. Go buy it, put the battery with the positive side up and put everything back.
There you go.
Take your wire and slide it gently under the battery. Pop it out.
Take a look at the battery and take in note the serial number. Go buy it, put the battery with the positive side up and put everything back.
There you go.