Changing the Sound Hook on an Oticon Engage Hearing Aid
by MissMagoo87 in Workshop > Repair
2184 Views, 2 Favorites, 0 Comments
Changing the Sound Hook on an Oticon Engage Hearing Aid
Sound hooks are curved, hollow "hooks" that screw onto to the hearing aid. These hooks function to hold the hearing aid onto the ear and to transmit sound from the hearing aid through to the tube that goes into the ear. Occasionally the sound hook needs to be changed to accommodate a different type of tubing or replaced if it has been damaged.
Here is a video link with step-by-step instructions on how to change the sound hook: https://www.youtube.com/watch?v=OCA_MwB5Ik4.
Supplies
- Pin Tool
- Oticon Engage Hearing Aid
- New Sound Hook
Hold Your Hearing Aid in One Hand With the Pin Facing You
The pin should be located closely below the hook and functions to keep the hook securely in place.
Place the Pin Tool on the Head of the Pin and Press Until the Pin Tool Engages Completely
The Pin Will Remain Attached to the Hearing Aid, Do Not Remove It Completely As It Can Easily Get Lost
Remove the Used Hook by Pulling It Gently
Insert the New Hook
Use the Flat End of the Pin Tool or a Hard Surface to Press the Pin Back Into the Hearing Aid
The Tube and Mould Can Now Be Attached to the Hook
