Kerosene to Propane Generator Conversion-Cheap and Easy

I have yamaha kerosene generator since kerosene is hardly to get, so I experimenting to use gas (propane). And it works.
It don't need any changes on the carburator so if there is no propane gas, I can still use kerosene or gasoline.
And it only cost around $15.

for this convertion we only need 3 main component.
- high pressure gas regulator
- gas hose
- gas valve (like the one in the picture)

tool: only drill

The gas valve will be place aline with the carburator.

Use our drill to make a hole at the air filter cover and air filter honeycomb.

use iron saw to cut the pipe on the gas valve, to adjust (if it necessary)

Now we can put it back in order.

It will need some feelings to start the engine.
We have to open the gas valve slowly so it will give the right mount of gas.
After it start, try to open and close the gas valve to get engine stationary stage.

WARNING

Always run the generator on open air or in good ventilation.
The gas will not automatically shutdown when the engine stop running.

Have a nice experiment.
Good luck.