Cheap Homemade Car Speaker Box

A few months ago I purchased a 1972 chevy c10. When I got it it had the original radio and no speakers so I had to buy speakers to put in it. Rather then going out to buy speaker boxes or Make them out of wood so I decided to make one out of an acetone one gallon container.

This project requires a one gallon acetone can, speakers, duct tape, a phillips head screwdriver, a sharpie, and a dremel.

To get the tin ready you need to make sure the tin is empty and then clean out the inside with soap and water.

To cut the tin take the ring that goes around the speaker and hold it onto the tin then trace the inside of the ring with your sharpie. Then take the dremel and cut around the lines.

Once you have cut out the hole with the dremel use the duct tape to tape over the sharp edges. Then put in the speaker with the ring around it use self taping screws to secure the speaker to the tin. Then put the speaker box under your seat and run the cord out the spout to your radio. Thanks for looking if you like it please vote for it in the art of sound contest.