Chicago Cubs Lighted Led Bat Sign

Finished product


Supplies needed:

Toy bat is at hobby lobby
eBay strip leds
12v 1amp power supplies
1/4 cast acrylic

Machines used:
Router
Table saw
Laser engraving machine
Soldering iron

After I cut them flat on one side with the table saw, I route a slot in every bat. I then laser engrave it. I use a 1/4 inch bit.

Cheap eBay non water proof led strips.

After I solder the power supply wires to it, I shove the leds into the slot.

1/4 cast acrylic isnused. I laser engrave the image onto the acrylic. 200mm/s 25% power.

Pretty much all is left is just pressing the acrylic into the the slot and plugging it in.


Thanks for watching!