Recycled Chopstick Perpetual Calendar (3D Printed)

A perpetual calendar that can stand on your desk or hang on your wall.

The stand uses two chopsticks

2 chopsticks

3d printer

I designed the 3d printed pieces in Tinkercad

Print one of each file.

The day, number and month circles can be printed in a single colour but to make them stand out you can change your filament mid-print - if you need help with this send me a message with your printer and slicer details.

Turn the front piece upside down and place the three ring upside-down into the slots.

Then push the back on firmly.

Turn the calendar over and if you want to use it as a wall calendar hang on the wall using the hole at the top. Each circle should move smoothly and independently and slot into place for each figure.

If you would like to have the calendar sitting on your desk progress to the next step

Place the two chopstick, thick end down, into the base and slide the top over the thin ends.

Slot your calendar onto your stand and you are ready to go

Combine the calendar with my chopstick planter for a co-ordinated office feel :)

https://www.instructables.com/Recycled-Chopsticks-Flowerplant-Stand/