Christmas Ornament @ TechShop

Christmas ornament made using laser cutter at TechShop.

http://www.techshop.ws/index.html

Need:
piece of ClipArt or image
2.5" x 3" x 1/4" Acrylic or similar (I used a piece of scrap)
6-8" piece of string or ribbon

Choose your clipart or image.

Start up laser cutter.

Import your image to Adobe Illustrator or CorelDraw.

Scale up or down to fit your piece or Acrylic.

Add an ellipse around the image and a hole at the top. Both need to be cut lines.

'Print' your picture to the laser cutter.

remove the protective paper after the laser cutting.

Feed the string through the new hole at the top and tie a knot.

Display or gift and Enjoy!