Cigar Case
You can have this acrylic pattern from here:
http://www.leathercraftpattern.com/leather-acrylic...
The finished size is about: 2.4" x 3.9" x 1.2" (6.2cm x 10cm x 3cm).
Hardware: 201 snap x1.
Leather: We advice 2.0mm (5oz) leather 30cm x 10cm.
Tools: If you are a new leather player, try to considerate to have tool kit here: http://www.leathercraftpattern.com/leather-tools-...
Cut All Leather Pieces From Acrylic Pattern. (this Is an Early Work, Now the Acrylic Pattern Has Stitching Holes On)
Paint Mink Oil on Grain Side.
Make Mark From Pattern on Flesh Side Use Awl.
Draw Fold Line Use Awl on Flesh Side.
Make Groove on Fold Line, Make Groove Will Make the Leather Easier to Be Fold.
Cut Edge to 45 Degree
You can use this tool to do this work: http://www.leathercraftpattern.com/45-degree-beve...
Groove Stitching Line.
Punch Stitching Holes in Grooves.
Paint Glue on Edge.
Pierce Needles to Fix Gusset and Main Body Together.
Do Stitching to Finish This Work.
