Clay Oogie Boogie

by jthomas104 in Craft > Clay

1125 Views, 6 Favorites, 0 Comments

Clay Oogie Boogie

D9981FF5-4354-4347-A9CA-6CEF64C6607B.jpeg
A63D3D15-925B-4C27-BC82-1BDEEDAE4EBA.jpeg
C0711C70-139A-44F8-9C93-31D2F35A7B18.jpeg
182AEB4F-1574-4049-B6E9-EF398B446273.jpeg
F88D0949-5FD7-4BF0-B16B-CC5461383EA6.jpeg
Air dry clay oogie boogie

Air Dry Clay Oogie Boogie

0E1D8A42-1979-4F67-B404-11C1E8F0D4D8.jpeg
B1ABA6EC-656D-4EC4-B55E-4943CEDF498B.jpeg
05F2BE48-398D-4F63-ADB9-D216448622D4.jpeg
Materials:

2 20oz sprite bottles
DAS modeling clay, white
Aluminum foil
Hot glue gun
Exacto knife and clay modeling tools
Acrylic paint
Fairy house LED lights


First I cut the bottom off one of the sprite bottles and turned it upside. This will be the pumpkin.
Use the rest of the bottle as the base for his body.

Cut the top and bottom off the next bottle, then cut the the rest in half long way so that it’s in two pieces. Take those pieces and glue them to each side of the body to flare it making boogie look fatter.
Next construct the head, arms and feet with aluminum foil and glue it on.
Cover it all with clay, then cut out the facial features and the pumpkin face with an exacto knife.
Then PAINT! After it’s dry you can put the light inside and it will glow green out of any parts of the clay you cut out! ??