Clean the Gutters and Put in Leaf Gaurds

by marc.cryan in Workshop > Repair

9698 Views, 44 Favorites, 0 Comments

Clean the Gutters and Put in Leaf Gaurds

IMG_0353-1.JPG
IMG_0347-1.JPG
IMG_0350-1.JPG
IMG_0351-1.JPG
IMG_0352-1.JPG
IMG_0354-1.JPG
IMG_0355-1.JPG
IMG_0356-1.JPG
IMG_0357-1.JPG
IMG_0359-1.JPG
IMG_0360-1.JPG
IMG_0361-1.JPG
IMG_0362-1.JPG
IMG_0363-1.JPG
IMG_0364-1.JPG
IMG_0366-1.JPG
IMG_0367-1.JPG
IMG_0371-1.JPG
IMG_0372-1.JPG
IMG_0374-1.JPG
IMG_0375-1.JPG
IMG_0376-1.JPG
IMG_0377-1.JPG
IMG_0378-1.JPG
IMG_0379-1.JPG
IMG_0380-1.JPG
IMG_0381-1.JPG
IMG_0382-1.JPG
IMG_0383-1.JPG
IMG_0384-1.JPG
IMG_0385-1.JPG
IMG_0386-1.JPG
IMG_0387-1.JPG
IMG_0388-1.JPG
IMG_0402-1.JPG
IMG_0403-1.JPG
IMG_0404-1.JPG
IMG_0405-1.JPG
IMG_0406-1.JPG
IMG_0407-1.JPG
IMG_0410-1.JPG
IMG_0414-1.JPG
IMG_0415-1.JPG
IMG_0416-1.JPG
IMG_0417-1.JPG
IMG_0418-1.JPG
IMG_0419-1.JPG
IMG_0421-1.JPG
IMG_0422-1.JPG
IMG_0423-1.JPG
IMG_0425-1.JPG
IMG_0426-1.JPG
IMG_0427-1.JPG
IMG_0428-1.JPG
IMG_0429-1.JPG
IMG_0430-1.JPG
IMG_0431-1.JPG
IMG_0434-1.JPG
IMG_0435-1.JPG
IMG_0436-1.JPG
IMG_0438-1.JPG
IMG_0442-1.JPG
IMG_0448-1.JPG
IMG_0449-1.JPG
IMG_0450-1.JPG
IMG_0451-1.JPG
IMG_0452-1.JPG
IMG_0453-1.JPG
IMG_0454-1.JPG
IMG_0455-1.JPG
IMG_0456-1.JPG
IMG_0457-1.JPG
IMG_0458-1.JPG
IMG_0459-1.JPG
IMG_0460-1.JPG
IMG_0461-1.JPG

Cleaning the gutters is not fun and there is no easy way to do it.

****NOTE: 9/2014 - I had to remove all of these after 2 years, totally clogged, big problem********


Motivation for this instructable:
I'm hoping to think of a better way to keep the gutters clean.

Why have gutters? Without gutters the rain would erode the base of the house and flood the basement. If the gutters are clean and slanted correctly, all the water from the roof will run down the downspout and you can divert it away from the foundation and maybe into rain barrels or a garden.

When the gutters are filled with leaves the water is trapped and rots the side of the house. The water may also overflow towards the house and cause the paint to peel.

Here are links to the stuff I used:


GutterStuff EZ 5-Inch K Style Foam Gutter Filter Insert, 32-Feet


Fiskars 7978 Composite Trowel

Tools and Stuff

IMG_0366-1.JPG
IMG_0385-1.JPG
IMG_0387-1.JPG
IMG_0359-1.JPG
You will at least need a ladder and a scoop.  Often there are minor repairs so it is good to have a drill and exterior screws.  We already have a mesh screen on the gutters, I am also adding foam strips I got at Costco.

Put Up the Ladder

IMG_0415-1.JPG
IMG_0434-1.JPG
IMG_0388-1.JPG
IMG_0386-1.JPG
IMG_0347-1.JPG
Lean the ladder against the house.  I rest it on the gutters with a few rungs over the edge.  I have never fallen off a ladder, but I have dropped a latter on my head, so watch out for that.

Clear Off the Big Stuff and Take Off the Gutter Gaurds

IMG_0459-1.JPG
IMG_0425-1.JPG
There is a thick layer of pine needles and leaves on top of the gutter screens.  Wipe this off and pull out the old gutter guards.

Kill Hornets and Remove Nests

IMG_0406-1.JPG
IMG_0403-1.JPG
IMG_0402-1.JPG
IMG_0414-1.JPG
IMG_0407-1.JPG
IMG_0405-1.JPG
This hornet spray makes a thick foam, trapping the wasps.  This is good if you are close to the nest.  Often the spray cans are very powerful so watch out for splatter.


Here is a video:


Scoop Out the Gunk

IMG_0435-1.JPG
IMG_0356-1.JPG
IMG_0357-1.JPG
IMG_0351-1.JPG
Alot of little stuff makes it through the mesh gutters.  Some maple trees are growing.  Use a little shovel to scoop all this out.  Chuck it on the ground.

Make Repairs

IMG_0371-1.JPG
IMG_0372-1.JPG
IMG_0367-1.JPG
In some spots the gutters have pulled away from the house.  Tack them back in place with deck screws.

Jam the Foam Gutter Guards Into the Gutters

IMG_0359-1.JPG
IMG_0362-1.JPG
IMG_0354-1.JPG
IMG_0361-1.JPG

Work the Foam in Under the Supports

IMG_0421-1.JPG
IMG_0422-1.JPG
IMG_0418-1.JPG
IMG_0416-1.JPG
The foam has to be forced under the gutter supports.  Be careful not to push the ladder over.

Replace the Screens

IMG_0429-1.JPG
IMG_0426-1.JPG
IMG_0427-1.JPG
IMG_0428-1.JPG
IMG_0457-1.JPG

Take a Break

IMG_0448-1.JPG
IMG_0382-1.JPG
IMG_0449-1.JPG
IMG_0451-1.JPG

Cut the Last Piece

IMG_0454-1.JPG
IMG_0455-1.JPG
IMG_0461-1.JPG
IMG_0442-1.JPG
The last piece will probably have to but cut to fit.  The foam can be torn by hand.  The mesh screens have to be cut with heavy scissors.

Note Damage

IMG_0436-1.JPG
IMG_0461-1.JPG
IMG_0431-1.JPG
There maybe spots that are too damages to fix at the time.  Take a picture or make a note to fix these spots, it can be hard to remember.

Done for Now

IMG_0458-1.JPG
IMG_0453-1.JPG