Cold Lights - or " the Lavendel Cold Light Trilogy "

by Leander Lavendel in Circuits > Gadgets

25754 Views, 728 Favorites, 0 Comments

Cold Lights - or " the Lavendel Cold Light Trilogy "

Kaltlicht.jpg

Hi,

just another Project of me. Cold lights or " The Lavendel Cold light Trilogy " . Here I have created three different cold lights with different Colours. Anyone can recreate these lights with a vew Things.

We need:

Some various, Brass Lamp parts

3 pc 300 Watt light bulbs ( larger, smaler, just like you want. Glass bottles or similar )

Fluorescent Powder Like this one

3 pc Test Tubes and Cork Like this one

6 pc UV-Leds and Resistor for 9V

3 pc 9V Battery

3 pc On / Off Switches

Textilcable

Different Acid and Sulfur Liver for Coloring

Thin Cables

Distilled Water

Hotglue

The Stand or Housing

DSC_4662.jpg
DSC_0129.jpg
DSC_0134.jpg

First we have to empty the bulbs. It give a lot of instructions here how to empty a lightbulb.

Be careful because the glass can break very quickly. In the second picture you can already see the shelter with the empty bulbs. Now even dye the thread . ( Pic 3 )

Glue an Uv Led in the Stand, directli under the Glas from the Bulb. Also we solder parallel a second Led to the Textilcabel. Make it long enough and you can cut later.

Glasholder

DSC_0145.jpg
DSC_0143.jpg
DSC_0146.jpg

Make 3 Glassholders for the Lightbulbs like your Fantasy. I made Spirals.

Cut the Test Tube to a lenght of ~ 10 cm. Dremel and Proxxon help you ;)

Drill a Hole in the Cork for the second UV-Led. ( Pic 2 ) and glue it with Hotglue. At the same time we still manufactures a cap for the test tubes like in the second Picture.

Now we put a on/off Switch in every Device and wire them to the Led´s ( Pic 3 )

The Filling

DSC04898.JPG
DSC04900.JPG
DSC04922.JPG
DSC04903.JPG
DSC04905.JPG
DSC04909.JPG
DSC04912.JPG
DSC04921.JPG

OK, now we experiment in our laboratory.^^

It makes a lot of fun to mix the color.

In these Step--> Use gloves and wear protective eyewear !!!!!

What we have?

Rhodamine B500 !!!!!! Rhodamine B is classified as hazardous under REACH/CLP legislation: Danger

Rhodamine 6G

------

Fluorescein

Bromofluorescein

Acridine Orange

Green Fluorescent Dye

Acridine orange, Bromofluorescein, Fluorescein and Fluorescent green are not classified as hazardous under REACH/CLP legislation

------

Optical Brightener

Optical Brightener is classified as hazardous under REACH/CLP legislation: Warning

-------

Fill the Test tubes with destilled Water. The Bulbs also.

Please only very , use very small amounts of the Fluorescent Dyes. Rhodamine immediately stained hands.

The imaging is really hard to leave. ( omg, i think on my red Fingers...........°!° )

Interim Result

DSC04923.JPG
DSC04924.JPG
DSC04925.JPG
DSC04927.JPG

Even without UV-Light :)

OK..........

DSC04951.JPG
DSC04952.JPG
DSC04954.JPG
DSC04955.JPG
DSC04956.JPG
DSC04937.JPG

with UV-Light !!!

It creates a beautiful light . Especially in the evenings , it makes for great Ambient.

Coldlights-or " The Lavendel Coldlight Trilogy "

In Hope you have Fun with this !!!

Your leander Lavendel