How to Make a Slitter

This tutorial one will show as to transform a steel beam of construction into a tool for masonry cut, or other parts of a construction.

As substance cousin you will need a steel beam of construction, preferential of 1/2", 3/4" or 1" of diameter.
Tools:
- Blowtorch;
- Sledge hammer;
- Grinder;
- Equipment of individual protection .

In this stage the tip of the iron must be warm until being completely Orange, after that on a metallic surface it must be conformed with the use of a sledge hammer to acquire the desired form.

With the use of a grinder and floppy disk, to sandpaper until the desired format.

In this step the tool starts to take form.

With a looping disk to make right the final format, and to sharpen the tool.

The part must be warm until being orange and placed SLOWLY in water again, after that it is alone to cut of the opposing side to make right the ideal length.

This is the fiinal appearance of the tool.

Special gratefulness to Alan, who is " The GUY " for these things.

THANKS