Compartment Thingie

You can put small things in this if you'd like. This is just for fun after all.

2 Cardboard toilet paper rolls(different sizes, one of them should be able to fit in the other one)

Masking tape(or any kind of tape)

Cardboard

Prepare all the pieces

-Cut out the cardboard paper rolls as seen in the pictures(For a clearer picture of the cut, look below)

-cut out small cardboard pieces to stack them up and make a prism, wrapping them in masking tape.(Make sure it could fit in the hole cut in the cardboard paper rolls)

-Cut out circular cardboard pieces(the size of the cardboard paper roll's base)

-Cut out a small piece of stick

-Stick the circular cardboard pieces to individual ends of the cardboard rolls

-Just stick these together like this with a glue gun(look at the video to see how it's used and then decide on the length)

Video=https://drive.google.com/file/d/12aQWRRrmK_RW8UnRXVJ16TzJVdf5ZK2W/view?usp=sharing

-cut out two strips of cardboard paper rolls(judge the width of this by how these strips will be used in step 5)

-Put the strips around one of the cardboard paper rolls as shown, remember to use this as a stopper not to let the other other cardboard paper roll go any further when put together

-Stab the stick thingie through the hole so it'll look and work like the video

The video=https://drive.google.com/file/d/1HFZYcFr8pwWnMZK9k_uJIUHWjWek2J3n/view?usp=sharing