Computer Case Shelf
In this instructable I'm going explain how create handy shelf from a dead computer tower.
Materials
2 wall plugs
2 1 inch Phillips screws
Phillips screwdriver
Power drill
1/4 Masonry drill bit (cuts through metal)
Computer case
2 1 inch Phillips screws
Phillips screwdriver
Power drill
1/4 Masonry drill bit (cuts through metal)
Computer case
Gut the Computer
Just because the computer is dead does mean all the parts are.
Remove Drives, Motherboard, Fans, Switches, LEDS or any other Addons.
Save components that can be used again for another computer or a micro-controller project.
Remove Drives, Motherboard, Fans, Switches, LEDS or any other Addons.
Save components that can be used again for another computer or a micro-controller project.
Make the Holes, Plug and Mount
Drill the holes on the computer case. Make an 8 inch gap between the two holes.
Poke the holes on the area of wall where you want to mount the Shelf.
Use the wall-plugs, then Screw.
Poke the holes on the area of wall where you want to mount the Shelf.
Use the wall-plugs, then Screw.