Computer Control Center - a DIY Workspace (in Progress)

 As i am no pro, i use Google SketchUp for the design and planning of my new table aka "The Beast", so i get some pretty good plans and also 3D-models.

 For the tabletop i used a 2m x 1.6m MDF-sheet.

Tools:
Saw, Sander, Pens, Tape, a Bowl, Drill

As usual i started by "drawing" the planned layout to the wood, now you can see where the bowl was for ;-)

 First of all:
Before making the inital cut, check the plans again!

After that i made a slighty smaller "hole" then i needed, to ENTER the beast ;-)

Once i had space i made the planned cutting.

 The whole sanding took me longer then the sawing, but i think, that's normal ;-)

 I decided to drill a big hole in one end for future cable-management.

 After the beast was ready i took it over to my office to run a few tests.

Also i'm waiting for the material for the legs (which i want to weld by myself *g*).

As soon as everything is done, i'm going to paint it ;-)

 While running the "usability tests" i found out, that i needed more room for stuff, so i designed a shelving unit for the beast which doubles as room divider to the "couch corner".

Just ordered the wood ;-)

I choose a red paint, just because i liked it ;-)

I took some metal from the "junkyard" of the inhouse weldingshop and asked the welders (with a bribe aka 'box of beer') to weld them as i want it - looks pretty good, or?