Concrete Leaf Casting

by lindastanke in Workshop > Molds & Casting

59041 Views, 685 Favorites, 0 Comments

Concrete Leaf Casting

SOLD #426 F (22x18.8) $85 .jpg

I enjoy making these leaf castings. My dad was a bricklayer, I love to garden, and it is fun! These leaves can be used both indoors and outdoors. You can see more of my leaves at ForeverLeaves.net or my facebook page Forever-Leaves.

Materials:

Mixing tub and mixing trowel

Leaf

Sand

Water

Piece of sheet plastic

Concrete Mix

Select a LEAF With a Nice Shape and Free of Holes and Tears. Using a Pile of Wet SAND, Form the Pile to Create the Desired Shape the Leaf Is to Have Once It Is Completed

Leaf Cating 001.jpg

Cover the Sand Mold With Plastic. Place Your Leaf, Vein Side Up, on the Plastic

Leaf Cating 002.jpg

Mix Your CONCRETE (premix Is Fine) and Press Concrete Over the Entire LEAF.

Leaf Cating 003.jpg
Leaf Cating 004.jpg

Let Dry for a Couple Days and Remove the Leaf. You Now Have the Vein Impression to Be Painted (acrylic Paint) and Sealed (concrete Sealer).

Leaf Cating.jpg